Shoulder Belt Replacement - Rear

Shoulder Belt Replacement - Rear

Removal Procedure




1. Remove the bolt (1) and the seat belt anchor on the wheelhouse trim panel.




2. Remove the upper back panel shelf. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair).
3. Remove the bolt (1) and the seat belt retractor (2).


Installation Procedure





Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the seat belt retractor (2) with the bolt (1).

Tighten the seat belt retractor bolt to 38 N.m (28 lb ft).

2. Install the upper back panel shelf. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair).




3. Install the seat belt anchor to the upper wheelhouse trim panel with the bolt (1).

Tighten the seat belt anchor bolt to 38 N.m (28 lb ft).