Engine Mount: Service and Repair

Engine Mount Replacement

Tools Required

J 28467-B (DW-117) Universal Engine Support Fixture

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.
2. Remove the upper radiator cover.
3. Remove the right front splash shield.
4. Support the engine assembly using the J 28467-B (1).




5. Remove the engine mount bracket retaining bolts.




6. Remove the engine mount retaining nuts.
7. Lower the engine.
8. Remove the engine mount.


Installation Procedure




1. Install the engine mount.
2. Raise the engine.

Notice: Refer to Fastener Notice (Fastener Notice).

3. Install the engine mount retaining nuts.

Tighten the engine mount retaining nuts to 40 N.m (30 lb ft).




4. Install the engine mount bracket retaining bolts.

Tighten the engine mount bracket retaining bolts to 55 N.m (41 lb ft).




5. Remove J 28467-B (1).
6. Install the right front splash shield.
7. Install the upper radiator cover.
8. Connect the negative battery cable.