Instrument Panel Cluster (IPC) - Replacement

REMOVAL PROCEDURE

Caution: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the instrument cluster bezel.
3. Disconnect the speedometer cable (1) by pushing on the plastic tab.
4. Remove the 4 screws.
5. Disconnect the 3 electrical connectors.
6. Remove the instrument cluster (3).

INSTALLATION PROCEDURE
1. Connect the 3 instrument cluster electrical connectors.
2. Install the instrument cluster (3) to the instrument panel. Secure the cluster with the 4 screws.
3. Connect the speedometer cable (1).
4. Install the instrument cluster bezel.
5. Connect the negative battery cable.