Seat Replacement - Bucket

Seat Replacement - Bucket

Removal Procedure

Caution: Refer toSIR Caution in Cautions and Notices.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.
2. Move the seat to the full forward position.




3. Remove the seat track fastener trim cover on the inboard seat track.




4. Remove the seat track retainer bolts securing the seat to the vehicle.
5. Move the seat to the full rearward position.




6. Remove the front seat track fastener trim covers.




7. Remove the front seat track bolts securing the seat to the vehicle.




8. With the seat slightly tilted forward, disconnect the electrical connectors.
9. With the aid of an assistant, remove the seat from the vehicle.



Installation Procedure

1. With the aid of an assistant, install the seat into the vehicle.




2. With the seat tilted slightly forward, connect the electrical connectors.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Lower the rear of the seat and install the track retainer fasteners in order to secure the rear of the seat to the vehicle.

Tighten the seat track retainer fasteners to 41 N.m (31 lb ft).





4. Install the seat fastener trim cover.
5. Position the seat to the full rearward position.




6. Install the seat retainer fasteners in order to secure the front of the seat to the vehicle.

Tighten the seat track retainer fasteners to 41 N.m (31 lb ft).





7. Install the seat track retainer fastener trim covers.
8. Reposition the seat.
9. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 in SIR.