Seat Back Frame Replacement - Front

Seat Back Frame Replacement - Front

Removal Procedure

1. Disable the SIR system. Refer toSIR Disabling and Enabling Zone 7 orSIR Disabling and Enabling Zone 9 in SIR.
2. Put the seat back in the full upright position.
3. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front (Seat Back Cover and Pad Replacement - Front) .
4. Remove the lumbar. Refer to Lumbar Replacement - Front Seat (Power) (Lumbar Replacement - Front Seat (Power)) .




5. Remove the fasteners (3) retaining the seat back frame (1) to the recliner.
6. Lift straight up on the seat back frame (1) in order to disengage the seat back frame from the recliner.



Installation Procedure





1. Slide the seat back frame (1) straight down into recliner .

Notice: Refer toFastener Notice in Cautions and Notices.

2. Install the seat back frame fasteners (3).

Tighten the seat back frame fasteners (3) to 28 N.m (21 lb ft).

3. Install the lumbar. Refer to Lumbar Replacement - Front Seat (Power) (Lumbar Replacement - Front Seat (Power)) .
4. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front (Seat Back Cover and Pad Replacement - Front) .
5. Enable the SIR system. Refer toSIR Disabling and Enabling Zone 7 orSIR Disabling and Enabling Zone 9 in SIR.