Trunk / Liftgate Latch: Service and Repair

Latch Replacement - Rear Compartment Lid (w/o Inside Release Handle)

Removal Procedure

1. Remove the rear compartment lid trim. Refer toCompartment Lid Trim Replacement - Rear (Compartment Lid Trim Replacement - Rear) .




2. Disconnect the electrical connectors from the lid latch assembly.
3. Remove the latch cable from the back of the lock cylinder.
4. Remove the fasteners retaining the lid latch assembly to the rear compartment lid.
5. Remove the lid latch assembly.



Installation Procedure





1. Position the lid latch assembly to the rear compartment lid.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners in order to retain the lid latch assembly to the rear compartment lid.

Tighten the fasteners 10.5 N.m (93 lb in).

3. Connect the electrical connectors to the lid latch assembly.
4. Install the rear compartment lid trim. Refer toCompartment Lid Trim Replacement - Rear (Compartment Lid Trim Replacement - Rear) .