Rear Bumper Shock Absorber: Service and Repair

Energy Absorber Replacement - Rear

Removal Procedure





1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Service and Repair) .
2. Remove the fasteners (1), using a # 3 square drive bit.
3. Remove the energy absorber from the fascia (2).



Installation Procedure





1. Align the energy absorber to the fascia (2).
2. Install the fasteners (1).
3. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Service and Repair) .