Weatherstrip Replacement - Rear Door Upper Auxiliary

Weatherstrip Replacement - Rear Door Upper Auxiliary

Removal Procedure

1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Rear Door Service and Repair
2. Remove the door control module.
3. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .
4. Remove the energy absorber pad. Refer to Energy Absorber Pad Replacement - Rear Door (Energy Absorber Pad Replacement) .
5. Remove the window inner belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner (Service and Repair) .
6. Remove the window outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer (Rear Door Window Belt Outer Sealing Strip Replacement) .
7. Remove the rear door window. Refer to Window Replacement - Rear Door (Service and Repair) .
8. Remove the rear door window weatherstrip. Refer to Weatherstrip Replacement - Rear Door Window (Service and Repair) .




9. Remove the rear door upper auxiliary weatherstrip screws (1-7).
10. Carefully pull the auxiliary weatherstrip away from the door header.



Installation Procedure





1. Seat the top of the seal lip over the door header flange.
2. Align the front hole in the weatherstrip to the plastic nut in the door header.
3. Starting at the front, roll the weatherstrip over the flange on the door header while holding the weatherstrip lip to prevent tucking under against door.
4. Install the door to door seal on to the forward flange of the door header starting at the top and working towards the bottom.
5. Ensure the front screw hole is aligned with the plastic nut in the door header.

Notice: Refer to Fastener Notice in Cautions and Notices.

6. Install the auxiliary weatherstrip screws (1-7).

Tighten the screws to 2 N.m (18 lb in).

7. Install the rear door window weatherstrip. Refer to Weatherstrip Replacement - Rear Door Window (Service and Repair) .
8. Install the rear door window. Refer to Window Replacement - Rear Door (Service and Repair) .
9. Install the window outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer (Rear Door Window Belt Outer Sealing Strip Replacement) .
10. Install the window inner belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner (Service and Repair) .
11. Install the energy absorber pad. Refer to Energy Absorber Pad Replacement - Rear Door (Energy Absorber Pad Replacement) .
12. Install the water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .
13. Install the door control module.
14. Install the door trim panel. Refer to Trim Panel Replacement - Side Rear Door Service and Repair