Trim Panel Replacement - Rear Window Shelf

Trim Panel Replacement - Rear Window Shelf

Removal Procedure

1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Seat Cushion Replacement - Rear) in Seats.
2. Remove the rear seat back. Refer toSeat Back Replacement - Rear (Seat Back Replacement - Rear) in Seats.
3. Remove the push fasteners at the front of the rear window trim panel.




4. Remove the outer shoulder belts (2) from the trim panel (1).
5. If equipped with center shoulder belt, remove the escutcheon from the trim panel.
6. Feed the center shoulder belt and escutcheon through the hole in the trim panel.
7. Remove the rear window trim panel (1) from the vehicle.



Installation Procedure





1. Position the trim panel inside of the vehicle.
2. If equipped with center shoulder belt, feed the belt and escutcheon though the hole in the trim panel.
3. Install the center shoulder belt escutcheon.
4. Install the outer shoulder belts to the trim panel (2).
5. Install the push fasteners to secure the rear window trim panel.
6. Install the rear seat back. Refer toSeat Back Replacement - Rear (Seat Back Replacement - Rear) in Seats.
7. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Seat Cushion Replacement - Rear) in Seats.