Front Bumper Shock Absorber: Service and Repair

Energy Absorber Replacement - Front

Removal Procedure





1. Remove the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper) .
2. Remove the screws (1) securing the energy absorber to the fascia, using a square drive bit.
3. Remove the energy absorber from the fascia.



Installation Procedure





1. Position the energy absorber to front bumper fascia.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws (1) to secure the energy absorber to the fascia using a square drive bit.

Tighten the screws to 4 N.m (35 lb in).

3. Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper (Fascia Replacement - Front Bumper) .