Knee Bolster Bracket Replacement

Knee Bolster Bracket Replacement

Removal Procedure

1. Remove the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).
2. Remove the knee bolster. Refer to Knee Bolster Replacement (Service and Repair).




3. Remove the fasteners securing the primary knee bolster bracket to the instrument panel.
4. Remove the fasteners securing the primary knee bolster bracket to the steering column support.
5. Remove the primary knee bolster bracket from the instrument panel.




6. Remove the secondary knee bolster bracket to carrier fasteners.
7. Remove the secondary knee bolster brackets from the carrier.

Installation Procedure




1. Install the secondary knee bolster brackets to the carrier.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the secondary knee bolster bracket fasteners

Tighten the fasteners to 10 Nm (89 lb in).




3. Install the primary knee bolster bracket.
4. Install the primary knee bolster bracket fasteners.

Tighten the fasteners to 2 Nm (18 lb in).

5. Install the knee bolster. Refer to Knee Bolster Replacement (Service and Repair).
6. Install the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).