Low Traction Indicator Inoperative

CIRCUIT DESCRIPTION
The Instrument Panel Cluster (IPC) turns the LOW TRAC Indicator on during the IPC bulb check for approximately 3 seconds when the ignition switch is turned to the ON position. The LOW TRAC Indicator is activated during a traction control event only. It the EBTCM detects a low traction condition, the EBTCM sends the IPC the command to turn the LOW TRAC Indicator on.

TEST DESCRIPTION
The numbers below refer to step numbers on the diagnostic table.
2. Checks if the IPC has the ability to turn the LOW TRAC indicator on.