Sunroof / Moonroof: Adjustments

Sunroof Panel Vertical Adjustment

ADJUSTMENT PROCEDURE



1. Slide the sunroof sunshade to the open position.
2. Adjust the sunroof window to the fully closed position.
3. Separately loosen the attaching screws and individually adjust the four corners of the window panel.




4. Adjust the front of the sunroof window (2) flush to 2 mm (0.08 in) below the roof surface.
5. Adjust the rear of the sunroof window (3) flush to 2 mm (0.08 in) above the roof surface.





NOTE: Refer to Fastener Notice in Cautions and Notices.

6. Tighten the sunroof window screws.

Tighten
Tighten the sunroof window screws to 4 N.m (35 lb in).