Instrument Panel Cluster Trim Plate Replacement

Cluster Filler Plates:

Cluster Trim Plate:

REMOVE OR DISCONNECT
1. Instrument cluster filler trim plates.
2. Instrument cluster trim plate by carefully pulling rearward.
3. Three electrical connectors from trim plate.
4. Fog lamp and mirror control switches from trim plate by disengaging tabs on switches from retainers on trim plate.
5. Trim plate.

INSTALL OR CONNECT
1. Snap fog lamp switch and mirror control switch to cluster trim plate.
2. Electrical connectors.
3. Trim plate to IP by inserting tabs into retainers and applying pressure until trim plate is fully seated.
4. Instrument cluster filler trim plates.