Shift Selector Handle Removal And Installation

SHIFT CONTROL SYSTEM

Shift Selector Handle Removal and Installation


REMOVAL


CAUTION:
Make sure that parking brake is applied before removal/installation.





1.Place the shift selector handle (1) in "N" position.
2.Slide shift selector handle cover (2) downward.
3.Pull out shift selector handle clip (3) from shift selector handle (1).
4.Remove shift selector handle (1) and shift selector handle cover (2) as a set from shift selector.

CAUTION:
Do not push shift selector handle button.

INSTALLATION






1.Insert shift selector handle clip (1) to shift selector handle (2).
2.Install shift selector handle cover (3) to shift selector handle (2).
3.Place the shift selector in "N" position.
4.Install shift selector handle over shift selector until a click is felt.

CAUTION:
- Do not tilt shift selector handle when installing. Install it straight, and do not tap or apply any shock to install it.
- Do not push shift selector handle button.