Receiver Dryer: Service and Repair

REFRIGERANT LINES

Removal and Installation of Liquid Tank


REMOVAL

1.Remove the condenser. Service and Repair.
2.Clean the liquid tank and its surrounding area, and remove dirt and rust from liquid tank.

CAUTION:
Be sure to clean carefully.





3.Remove the bolts (A) and (B) from liquid tank.





4.Remove the liquid tank bracket (1) from protruding part of condenser (2).
5.Slide the liquid tank (3) upward, and then remove the liquid tank (3).

INSTALLATION






Installation is in the reverse order of removal.

CAUTION:
- Make sure liquid tank bracket (2) is securely installed at protrusion of condenser (3). [Make sure liquid tank bracket (2)
does not move to a position below center of liquid tank (1).]
- Do not reuse O-rings.
- Apply A/C oil to the O-rings of the A/C piping for installation.
- When recharging refrigerant, check for leaks. Checking Of Refrigerant Leaks.