Blower Motor: Service and Repair

BLOWER MOTOR

Removal and Installation


REMOVAL

1.Remove the instrument panel and pad. Removal And Installation.





2.Disconnect the blower motor connector (1).
3.Push the flange holding hook (A) toward the blower motor (2), then rotate the blower motor (2) clockwise and remove it from the A/C unit assembly.

INSTALLATION






1.Rotate the blower motor (2) until the blower motor flange holding hook (A) locks securely into the A/C unit assembly.
2.Connect the blower motor connector (1).
3.Install the instrument panel and pad assembly. Removal And Installation.