Air Mix Door Cable Adjustment

AIR MIX DOOR

Air Mix Door Cable Adjustment

1.Remove the glove box assembly. Removal And Installation.





2.Remove the outer cable of the air mix door cable (1) from the clamp (A).
3.Set the temperature control dial to full cold position.
4.Push the air mix door lever (2) in the direction shown by the arrow, and then carefully pull the outer cable toward the controller side, and install the clamp (A).
5.Operate the temperature control dial to insure that the inner cable moves smoothly.

CAUTION:
When clamping the outer cable, do not move the inner cable.