Rear

BRAKE TUBE AND HOSE

Rear Brake Tube and Hose

NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.

REMOVAL

1.Drain brake fluid. Drain and Refill.
2.Remove brake tube from brake hose using a suitable tool.





3.Remove lock plate, and remove brake hose.

INSTALLATION

1.Connect brake hose to brake tube, and temporarily tighten flare nut by hand as much as possible.





2.Secure it to the bracket with the lock plate.
3.Tighten flare nut to the specified torque using a suitable tool.
Diagrams.
4.Bleed the air from the brake hydraulic system. Service and Repair.