Cowl Moulding / Trim: Service and Repair

COWL TOP

Removal and Installation












REMOVAL

1.Remove front wiper arms (RH/LH). Service and Repair.





2.Disconnect washer tube.
White arrow indicates : Vehicle front
3.Release the clips and remove cowl top seal.
4.Remove the clips and cowl top covers (RH/LH) as necessary.
5.Disconnect and remove the front wiper motor and linkage assembly, if necessary. Service and Repair.

CAUTION:
To avoid damage, make sure to cover the lower edge of windshield with suitable protection material.
6.Remove the bolts and cowl extension panel, if necessary.

INSTALLATION

Installation is in the reverse order of removal.
- For wiper arm (RH/LH) installation and adjustment, "Removal and Installation of Front Wiper Arms".
- Always replace EPT sealer and double-faced adhesive tape when installing cowl top cover.