Front Power Window RH Circuit Inspection (Main Power Window And Door Lock/Unlock Switch Operation)

POWER WINDOW SYSTEM

Front Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation)


1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL






1.Disconnect front power window motor RH.
2.Turn ignition switch ON.
3.Check voltage between front power window motor RH connector and ground.





OK or NG
OK- Replace front power window motor RH. Removal And Installation.
NG- GO TO 2.

2. CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT






1.Disconnect front power window motor RH and power window and door lock/unlock switch RH.
2.Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and front power window motor RH connector D105 (B) terminals 1, 3.
7 - 3: Continuity should exist.
6 - 1: Continuity should exist.
3.Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and ground.
6 - Ground: Continuity should not exist.
7 - Ground: Continuity should not exist.
OK or NG
OK- GO TO 3.
NG- Repair or replace harness.

3. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH






Check continuity between power window and door lock/unlock switch RH terminals.





OK or NG
OK- GO TO 4.
NG- Replace power window and door lock/unlock switch RH.
Service and Repair.

4. CHECK GROUND SUPPLY CIRCUIT






1.Disconnect main power window and door lock/unlock switch.
2.Check continuity between main power window and door lock/
unlock switch and power window connector (A) and door lock/
unlock switch RH connector (B).





3.Check continuity between main power window and door lock/
unlock switch connector (A) and ground.





OK or NG
OK- GO TO 5.
NG- Repair or replace harness.

5. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH SIGNAL






1.Connect main power window and door lock/unlock switch.
2.Turn ignition switch ON.
3.Check voltage between main power window and door lock/
unlock switch connector and ground.





OK or NG
OK- Repair or replace harness.
NG- Replace main power window and door lock/unlock switch. Service and Repair.