Removal and Replacement

BATTERY

Removal and Installation (MR20DE Battery)


REMOVAL MR20DE






1.Loosen battery terminal nuts (A), and disconnect both negative and positive battery terminals.

CAUTION:
Disconnect the battery negative terminal first.
2.Remove battery frame nuts (B) and battery frame.
3.Remove battery.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Connect the battery positive terminal first.

Battery frame nuts: 5.4 Nm (0.55 kg-m, 48 in-lb)
Battery terminal nuts: 5.4 Nm (0.55 kg-m, 48 in-lb)
Reset electronic systems as necessary. Required Procedures After Battery Disconnection.