Fog/Driving Lamp Bulb: Service and Repair

FRONT FOG LAMP

Bulb Replacement


WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.

CAUTION:
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
- Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of fog lamp. When replacing bulb, be sure to replace it with new one.
1.Turn lighting switch OFF.
2.Position aside the front fender protector as necessary. Removal And Installation.





3.Disconnect front fog lamp connector (1).
4.Turn bulb socket (2) counterclockwise unlock and remove it.
5.Remove bulb from its socket.