Base And Mid System

AUDIO

Sound Is Not Heard from Front Door Speaker or Front Tweeter (Base and Mid System)


1. CONNECTOR CHECK

Check the audio unit and speaker connectors for the following:
- Proper connection
- Damage
- Disconnected or loose terminals
Is the inspection result normal?
YES- GO TO 2
NO- Repair the terminal and connector.

2. HARNESS CHECK

1.Disconnect audio unit connector and front door speaker and front tweeter (mid system) connector (LH or
RH).





2.Check continuity between audio unit harness connector terminal and front door speaker and front tweeter (mid system) harness connector terminal.





3.Check continuity between audio unit harness connector terminal and ground.





OK or NG
OK- GO TO 3.
NG- Repair harness or connector.

3. FRONT SPEAKER SIGNAL CHECK

1.Connect audio unit connector, front door speaker connector and front tweeter (mid system) connector.
2.Turn ignition switch to ACC.
3.Push "POWER" switch.





4.Check the signal between audio unit connector terminals with
CONSULT or oscilloscope.





OK or NG
OK- Replace front speaker. Without Navigation.
NG- Replace audio unit. Without Navigation.