Removal And Installation

REAR WIPER ARM

Removal and Installation


REMOVAL

1.Operate rear wiper to the auto stop position.
2.Remove rear wiper arm cover.
3.Remove rear wiper arm mounting nut.
4.Remove wiper arm from the vehicle.

INSTALLATION






1.Clean wiper arm mount as shown in the figure to prevent nut from being loosened.
2.Operate the rear wiper motor to the auto stop position.
3.Adjust the rear wiper blade position. Rear Wiper Arm.
4.Install the rear wiper arm by tightening the mounting nut.
5.Inject the washer fluid.
6.Operate the rear wiper to the auto stop position.
7.Check that the rear wiper blades stop at the specified position.
8.Install the rear wiper arm cover.