Removal And Installation

FRONT WIPER ARM

Removal and Installation


REMOVAL

1.Operate front wiper to move it to the auto stop position.
2.Open the hood.





3.Disengage front wiper arm cap (1) fixing pawls with a remover tool (A), and then remove front wiper arm cap from the wiper arm (2).

Broken triangle indicates : Pawl
White arrow indicates : Vehicle front

4.Remove front wiper arm mounting nuts.
5.Raise front wiper arm, and then remove front wiper arm from the vehicle.

INSTALLATION






1.Clean wiper arm mount as shown in the figure to prevent nuts from being loosened.
2.Operate front wiper motor to move the front wiper to the auto stop position.
3.Adjust front wiper blade position. Front Wiper Arm.
4.Install front wiper arm by tightening the mounting nuts.
5.Inject the washer fluid.
6.Operate front wiper to move it to the auto stop position.
7.Check that the front wiper blades stop at the specified position.
8.Install front wiper arm caps.