Removal And Installation

WASHER TANK

Removal and Installation


REMOVAL

1.Fully open hood.





2.Remove washer tank inlet fixing clip (A).
3.Pull out washer tank inlet (1) from washer tank.

White arrow indicates : Vehicle front

4.Remove fender protector RH (front). Removal And Installation.
5.Disconnect washer pump connector.
6.Disconnect washer level switch connector (Canada models only).
7.Disconnect front washer tube and rear washer tube.
8.Remove washer tank mounting bolts.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Add water up to the top of washer tank inlet after installing and check that there is no leakage.