Work Procedure

CHECK ANTI-PINCH FUNCTION

Work Procedure


1. CHECK ANTI-PINCH FUNCTION

1.Fully open the door window.
2.Place a piece of wood near fully closed position.
3.Close door glass completely with AUTO-UP.
4.Check the following conditions.
-Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
-Check that glass does not rise not when operating the power window main switch while lowering.

CAUTION:
-Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
-Check that AUTO-UP operates before inspection when system initialization is performed.
-Do not check with hands and other body parts because they may be pinched. Do not get pinched.
- END