Front Power Window Switch (Passenger Side)

FRONT POWER WINDOW SWITCH (PASSENGER SIDE)

Component Function Check


1. CHECK FUNCTION

Check front power window motor (passenger side) operation with front power window switch (passenger side).
Is the inspection result normal?
YES- INSPECTION END
NO- .


Diagnosis Procedure


1. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) INPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect front power window switch (passenger side) connector.
3.Turn ignition switch ON.
4.Check voltage between front power window switch (passenger side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect power window main switch connector.
3.Check continuity between front power window switch (passenger side) harness connector and power window main switch harness connector.





4.Check continuity between front power window switch (passenger side) harness connector and ground.





Is the inspection result normal?
YES- Replace power window main switch. Service and Repair.
NO- Repair or replace harness.

3. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)

Check front power window switch (passenger side).
.
Is the inspection result normal?
YES- GO TO 4.
NO- Replace front power window switch (passenger side).

4. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END


Component Inspection


1. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE)

1.Turn ignition switch OFF.
2.Disconnect front power window switch (passenger side) connector.
3.Check front power window switch (passenger side) terminals under the following conditions.





Is the inspection result normal?
YES- INSPECTION END
NO- Replace front power window switch (passenger side).