Removal And Installation

WATER HOSE

Removal and Installation


REMOVAL


WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator.

CAUTION:
Perform these steps after the coolant temperature has cooled sufficiently.
1.Remove the battery. Removal And Installation.
2.Remove the ECM and bracket as a set.
3.Remove the water hose.
4.Remove the heater thermostat.

INSTALLATION

Note the following, and Install in the reverse order of removal.
- Refer to the following when installing water hoses.










- Refer to the followings when installing hose clamp.

CAUTION:
Hose clamp should not interfere with the bulge of fluid cooler tube.