With Intelligent Key System

HAZARD FUNCTION

Component Function Check


1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "FLASHER" in "ACTIVE TEST" mode.
3.Check that the function operates normally according to the following conditions.





Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- .


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Hazard Switch.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END