Removal And Installation

COMBINATION METER

Removal and Installation


REMOVAL

1.Remove cluster lid A. Removal And Installation.
2.Remove the mounting screws of the combination meter.





3.Pull the combination meter straight to disengage resin clips.
(The figure shows the clip positions on the back of the combination meter.)

CAUTION:
Never damage the front cover.





4.Turn the lower part of the combination meter in the direction of the arrow to remove the combination meter from the instrument panel assembly.

CAUTION:
Never damage the front cover.
5.Remove connector to remove the combination meter.

CAUTION:
Never damage the front cover.

INSTALLATION

Install in the reverse order of removal.