Inspection

OIL COOLER

Inspection


INSPECTION AFTER REMOVAL

Oil Cooler
Check oil cooler for cracks. Check oil cooler for clogging by blowing through engine coolant inlet. If necessary, replace oil cooler assembly.

INSPECTION AFTER INSTALLATION

1.Check the engine oil level and the engine coolant level and add engine oil and engine coolant. Refer to
Testing and Inspection and Inspection.
2.Start the engine, and check that there is no leakage of engine oil or engine coolant.
3.Stop the engine and wait for 10 minutes.
4.Check the engine oil level and the engine coolant level again. Testing and Inspection and Inspection.