Center Pillar Lower Garnish

BODY SIDE TRIM

CENTER PILLAR LOWER GARNISH : Removal and Installation


REMOVAL


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.
1.Fully open front door and rear door.
2.Slide front seat to the fully forward position. Tilt seatback forward.
3.Remove Front body side welt and rear body side welt. Body Side Welt.





4.Disengage center pillar lower garnish fixing clips and pawls with a remover tool (A), and then remove center pillar lower garnish.

Broken circle indicates : Clip
Broken triangle indicates : Pawl

INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing center pillar lower garnish, check that clips are securely in body panel holes, and press them in.