Inspection

CONTROL LINKAGE

Inspection


INSPECTION AFTER INSTALLATION

- Check that the shifter lever knob maintains its position.
- Operate the shifter lever in each position to check that the shifter lever smoothly operates without any complication, snag, noise, backlash, or interference. If any malfunction is fund, repair malfunctioning parts or replace the M/T shift selector.
- Check that the shifter lever automatically and smoothly returns to the neutral position when selecting the 1st2nd side and the 5th-6th side. If any malfunction is fund, repair malfunctioning parts or replace the M/T shift selector.