Removal And Installation

IGNITION COIL, SPARK PLUG AND ROCKER COVER

Removal and Installation


REMOVAL

1.Remove intake manifold. Exploded View.
2.Remove ignition coil.

CAUTION:
- Never drop or shock ignition coil.
- Never disassemble ignition coil.
3.Remove rocker cover.





- Loosen bolts in the order of 7 to 1 as shown in the figure.

White arrow indicates : Engine front

4.Remove PCV valve and PCV hose, if necessary.
5.Remove rocker cover gasket from rocker cover.
6.Use scraper to remove all traces of liquid gasket from cylinder head and front cover.

CAUTION:
Never scratch or damage the mating surface when cleaning off old liquid gasket.

INSTALLATION


CAUTION:
Do not reuse O-rings.
1.Install the rocker cover gasket to rocker cover.

CAUTION:
Check the gasket is not dropped.
2.Install rocker cover.





- Tighten bolts in two steps separately in the order of 1 to 7 as shown in the figure.





3.Install in the reverse order of removal, for the rest of parts.