A/C Indicator

A/C INDICATOR

Component Function Check


1. PERFORM AUTO ACTIVE TEST OF A/C INDICATOR

With CONSULT
1.Select the "AIR COND IND" on "ACTIVE TEST" in BCM.
2.Check the A/C indicator status.
On: A/C indicator ON
Off: A/C indicator OFF
Is inspection result normal?
YES- INSPECTION END
NO- .


Diagnosis Procedure


1. DEFINE THE MALFUNCTION

Define the A/C indicator malfunction.
A/C indicator does not turn ON-GO TO 2.
A/C indicator does not turn OFF-GO TO 6.

2. CHECK FUSE

Check 10A fuse [No. 16, located in the fuse block (J/B)].
NOTE:
Fuse Block - Junction Box (J/B).
Is inspection result normal?
YES- GO TO 3.
NO- Replace fuse after repairing the applicable circuit.

3. CHECK VOLTAGE BETWEEN A/C CONTROL POWER SUPPLY

1.Turn the ignition switch ON.
2.Check voltage between A/C control harness connector and the ground.





Is inspection result normal?
YES- GO TO 4.
NO- Repair the harness or connector between A/C control and fuse.

4. CHECK VOLTAGE BETWEEN A/C CONTROL AND GROUND

Check voltage between A/C control harness connector and the ground.





Is inspection result normal?
YES- GO TO 5.
NO- Replace the A/C control (A/C indicator).

5. CHECK CONTINUITY BETWEEN A/C CONTROL AND BCM

1.Turn the ignition switch OFF.
2.Disconnect the A/C control connector.
3.Disconnect the BCM connector.
4.Check continuity between A/C control harness connector and BCM harness connector.
With Intelligent Key





Without Intelligent Key





Is inspection result normal?
YES- GO TO 6.
NO- Repair the harness or connector.

6. CHECK CONTINUITY BETWEEN A/C CONTROL AND GROUND

1.Check continuity between A/C control harness connector and the ground.





Is inspection result normal?
YES- Replace the BCM. Exploded View.
NO- Repair the harness or connector.