Inlet Port Memory Function

AUXILIARY MECHANISM

Inlet Port Memory Function


DESCRIPTION

- Inlet port setting can be memorized when ignition switch is turned OFF.
- Inlet port setting can be selected from FRE (fresh air intake), REC (recirculation), or "Do not perform the memory" when ignition switch is turned ON.

OPERATING PROCEDURES

1.Begin self-diagnosis STEP 5 mode. Reading and Clearing Diagnostic Trouble Codes.
2.Press fan control switch (up: +) two times to change the mode to the temperature setting trimmer from self-diagnosis STEP 5, and then the display shows "70".
3.The setting of inlet port memory function can be selected from "70" to "73" by pressing the FRE switch.