Without Intelligent Key System

FRONT FENDER

Removal and Installation


CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.

REMOVAL

1.Remove side turn signal lamp. Removal And Installation.
2.Remove front grille. Removal And Installation.
3.Remove front bumper fascia. Removal And Installation.
4.Remove front combination lamp. Refer toRemoval And Installation.
5.Remove clips and screws of fender protector. Removal And Installation.
6.Remove front fender cover.
7.Remove mounting bolts and remove front fender.

CAUTION:
An viscous urethane foam is installed on the back surface of front fender. When removing the front fender, be careful to not deform the front fender while performing the procedure and removing the viscous urethane foam a little at a time.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.
- After installation, adjust the following part.
- Hood assembly : Without Intelligent Key System.
- Front door : Without Intelligent Key System.
- Front combination lamp : Description.