Without Intelligent Key System

HOOD

HOOD ASSEMBLY : Removal and Installation


REMOVAL

1.Support hood lock assembly with the proper material to prevent it from falling.

WARNING:
Bodily injury may occur if no supporting rod is holding hood open when removing hood stay.
2.Remove hood hinge mounting nuts on the hood to remove the hood assembly.

CAUTION:
Perform work with 2 workers, because of its heavy weight.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Perform work with 2 workers, because of its heavy weight.
- Check hood hinge rotating part for poor lubrication. If necessary, apply body grease.
- After installation, apply touch-up paint (the body color) onto the heads of hood hinge mounting bolts and nuts.
- After installing, perform hood fitting adjustment. Without Intelligent Key System.