Diagnosis Procedure LH&RH Front Anti-Pinch Coupe

POWER WINDOW MOTOR

DRIVER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, Coupe With Left And Right Power Window Anti-Pinch.

Power Window Motor LH Circuit Check


1. CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect power window motor LH.
3.Turn ignition switch ON.
4.Check voltage between power window motor LH connector and ground.





Is the measurement value within the specification?
YES- GO TO 3
NO- GO TO 2

2. CHECK HARNESS CONTINUITY

1.Turn ignition switch OFF.
2.Disconnect main power window and door lock/unlock switch and power window motor LH.
3.Check continuity between main power window and door lock/ unlock switch connector (A) and power window motor connector
LH (B).





4.Check continuity between main power window and door lock/unlock switch connector (A) and ground.





Is the inspection result normal?
YES- Replace main power window and door lock/unlock switch. LH & RH Front Anti-Pinch Coupe. After that, LH&RH Front Anti-Pinch Coupe.
NO- Repair or replace harness.

3. CHECK POWER WINDOW MOTOR

Check power window motor LH.
Component Inspection LH&RH Front Anti-Pinch Coupe.
Is the inspection result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- Replace power window motor LH. Removal And Installation. After that, refer to
LH&RH Front Anti-Pinch Coupe.