Disassembly And Assembly

POWER STEERING OIL PUMP

QR25DE : Disassembly and Assembly












INSPECTION BEFORE DISASSEMBLY

Disassemble the power steering oil pump only if the following items are found.
- Deformed or damaged bracket, connector or suction pipe
- Oil leakage from the suction pipe or connector.
- The power steering oil pump and pulley is not serviceable and should be replaced as an assembly.

DISASSEMBLY

NOTE:
Mount the power steering oil pump in a vise as needed.
1.Remove the bolt, the suction pipe and the O-ring.

CAUTION:
Do not reuse the O-ring.
2.Remove the bracket bolts and bracket(s).

INSPECTION AFTER DISASSEMBLY

Body Assembly Inspection
Check the power steering oil pump body assembly for damage. If any damage is found, replace with a new power steering oil pump assembly.

ASSEMBLY

Assembly is in the reverse order of disassembly.

CAUTION:
- Do not reuse O-rings or copper sealing washers.
- Apply a coat of Genuine NISSAN PSF or equivalent to the new O-ring. Recommended Chemical Products And Sealants (United States and Canada), Recommended Chemical Products And Sealants (Mexico).