Removal And Installation Coupe

BATTERY

Removal and Installation (Battery Tray)


REMOVAL

1.Remove battery and battery tray liner. Removal And Installation Coupe.
2.Remove air cleaner assembly. Service and Repair (QR25DE models) or Service and Repair (VQ35DE models).
3.Disconnect and remove ECM.
4.Disconnect transmission control module (TCM) (CVT models). Removal And Installation (RE0F09B) or Removal And Installation (RE0F10A).
5.Remove the ECM bracket.
6.Remove current sensor from battery tray.
7.Remove the battery tray bolts and battery tray.

INSTALLATION

Installation is in the reverse order of removal.
Reset electronic systems as necessary. Special Repair Requirement Coupe.