CVT Finisher

CVT FINISHER

Removal and Installation


REMOVAL


CAUTION:
Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect components from damage.





1.Place the shift selector (5) into the drive (D) position.
2.Remove the shift selector handle (1).
a.Release the shift selector handle cover (3) using a suitable tool from the base of the shift selector handle (1).
b.Remove the shift selector handle clip (2).
c.Pull upward and remove the shift selector handle (1).
3.Release the clips using a suitable tool, then lift the CVT finisher (4) upward.
4.Remove the CVT finisher illumination bulb from the CVT finisher and remove the CVT finisher (4).
Broken Triangle indicates: Clip

INSTALLATION

Installation is in the reverse order of removal.