Sedan

FRONT BUMPER

Removal and Installation












REMOVAL

1.Partially remove the front fender protectors (RH/LH). Sedan.
2.Remove the clips, then the engine undercover.
3.Remove the front grille. Sedan.
4.Disconnect the fog lamp connectors, (if equipped).
5.Remove the fog lamp, if equipped. Service and Repair.
6.Remove the front bumper fascia clips and screws, then remove the front bumper fascia.
7.Remove the front energy absorbing foam.
8.Remove the retainers, then the front bumper upper reinforcement and front bumper reinforcement bracket.
9.Remove the nuts, then the front bumper reinforcement.
10.Remove the retainers, then the front bumper supports (RH/LH).

INSTALLATION

Installation is in the reverse order of removal.
- Adjust fog lamp aiming, if equipped. Adjustments. mm (in)
EXT