CVT Shift Control System

SHIFT CONTROL SYSTEM


Shift Selector Handle Removal and Installation


REMOVAL

CAUTION:
Make sure that parking brake is applied before removal and installation.





1. Set shift selector handle (1) in "N" position.
2. Slide shift selector handle cover (2) downward.
3. Pull out lock pin (3) from shift selector handle (1).
4. Remove shift selector handle (1) and shift selector handle cover
(2) as a set from shift selector.

CAUTION:
Do not push shift selector button.

INSTALLATION





1. Insert lock pin (3) to shift selector handle (1).
2. Install handle cover (2) to shift selector handle (1).
3. Set shift selector in "N" position.
4. Install shift selector handle over shift selector until a click is felt.

CAUTION:
- Do not tilt shift selector handle when installing. Install it straight, and do not tap or apply any shock to install it.
- Do not push shift selector button.