Shift Control System

SHIFT CONTROL SYSTEM


Adjustment of CVT Position


CAUTION:
Make sure that parking brake is applied before adjustment.
1. Loosen the control cable nut and place the manual lever in "P" position.
2. Place shift selector in "P" position.
3. Temporarily tighten the control cable nut.

NOTE:
Do not move the manual lever. Make sure the manual lever stays in the "P" position.
4. Tighten the control cable nut.






CAUTION:
Secure the manual lever when tightening nut.
5. Check the operation of the CVT. Testing and Inspection.