Removal and Installation

COOLING FAN


Removal and Installation


WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur form high pressure coolant escaping from the radiator.

REMOVAL
1. Partially drain engine coolant from radiator. Changing Engine Coolant.

CAUTION:
- Perform this step when engine is cold.
- Do not spill engine coolant on drive belt.
2. Remove air duct (inlet). Component Removal And Installation.
3. Disconnect radiator hose (upper) at radiator side. Component Removal and Installation.
4. Disconnect harness connectors from fan motor, and position harness aside.
5. Remove cooling fan assembly.

CAUTION:
Be careful not to damage or scratch the radiator core.

INSTALLATION
Installation is in the reverse order of removal.
- Cooling fans are controlled by ECM. For details, System Description Except For California.

CAUTION:
Be careful not to damage or scratch the radiator core.