Rear Shelf: Service and Repair

REAR PARCEL SHELF FINISHER


Removal and Installation












REMOVAL
1. Fold rear seat cushion and seat back into forward most position.
2. Remove rear seat belt lower anchor bolts. Rear Seat Belt.
3. Release the tabs and remove the rear seat belt escutcheons (2)(RH/LH/Center).
4. Remove rear kicking plate lowers (RH/LH), rear kicking plate uppers (RH/LH), and rear pillar finishers
(RH/LH). Body Side Trim.
5. Release the clips and remove the high mounted stop lamp (3) from the rear parcel shelf finisher (1), if equipped. Rotate lamp, disconnect connector and remove high mounted stop lamp (3).
6. Remove the clips (A) along the front edge of the rear parcel shelf finisher (1).
7. Release the clips while removing the rear parcel shelf finisher (1).

INSTALLATION
Installation is in the reverse order of removal.