Satellite Radio Tuner Communication Circuit Inspection (Mid System) Audio Without Navigation

AUDIO


Satellite Radio Tuner Communication Circuit Inspection (Mid System)

1.CHECK HARNESS - 1
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56 and audio unit connector M45.





3. Check continuity between satellite radio tuner harness connector B56 (A) terminal 28 and audio unit harness connector M45
(B) terminal 52.






4. Check continuity between satellite radio tuner harness connector B56 (A) terminal 28 and ground.






OK or NG
OK - GO TO 2.
NG - Repair harness or connector.
2.CHECK HARNESS - 2





1. Check continuity between satellite radio tuner harness connector B56 (A) terminal 29 and audio unit harness connector M45
(B) terminal 53.






2. Check continuity between satellite radio tuner harness connector B56 (A) terminal 29 and ground.






OK or NG
OK - GO TO 3.
NG - Repair harness or connector.
3.CHECK HARNESS - 3





1. Check continuity between satellite radio tuner harness connector B56 (A) terminal 30 and audio unit harness connector M45
(B) terminal 54.






2. Check continuity between satellite radio tuner harness connector B56 (A) terminal 30 and ground.






OK or NG
OK - GO TO 4.
NG - Repair harness or connector.
4.CHECK REQ1 SIGNAL
1. Connect satellite radio tuner connector and audio unit connector.
2. Turn ignition switch to ACC.





3. Check signal between satellite radio tuner harness connector
B56 terminal 28 and ground with CONSULT-III or oscilloscope.






OK or NG
OK - GO TO 5.
NG - Replace audio unit. Removal And Installation Audio Without Navigation.
5.CHECK TXD SIGNAL





Check signal between satellite radio tuner harness connector B56 terminal 29 and ground with CONSULT-III or oscilloscope.






OK or NG
OK - GO TO 6.
NG - Replace audio unit. Removal And Installation Audio Without Navigation.
6.CHECK RXD SIGNAL





Check signal between satellite radio tuner harness connector B56 terminal 30 and ground with CONSULT-III or oscilloscope.






OK or NG
OK - Replace satellite radio tuner. Removal And Installation Audio Without Navigation.
NG - Replace audio unit. Removal And Installation Audio Without Navigation, "Removal and
Installation".